The JTP series are self-priming peripheral pumps, with peripheral impeller containing numerous radial blades in its edge, self-priming because of the particular design of the pump body which is with a small tank, water is threw outwards by centrifugal motion caused by the impeller. Then the water rotates with the impeller, generating high pressure. These pumps have a compact size and are very economical, finding the most different operating requirements such as: Supply water from well, pool an so on, increase the water pressure in the pipe, garden sprinkling or clean washing.
Pumps should be installed in a covered area, protected against the weather.
Operating Limitations
Max ambient temperature up to 40C
Max fluid temperature up to 80C
Max pressure up to 10 bar
Construction Features
Pump Body: Cast iron
Motor Housing: Aluminum
Shaft: 45#steel /stainless steel
Impeller: Brass
Motor: Closed, externally ventilated
Insulation Class: B/F
Protection Class: IP44/IP54
Duty: Continuously rated
Mechanical Seal: Ceramic steatite/ metalized carbon
220V/50Hz, 230V/50Hz, 110V/60Hz & 115V/60Hz models are available on request.
| Type |
Power |
Q. MAX L/min |
H. MAXm |
S. Head m |
Inlet/Outlet |
Packaging Dimension mm |
G. W. Kg |
| KW |
HP |
| JTP60 |
0.37 |
0.5 |
40 |
35 |
9 |
1" /1" |
280x170x210 |
6.8 |
| JTP70 |
0.55 |
0.75 |
45 |
50 |
9 |
1" /1" |
300x180x220 |
8.8 |
| JTP80 |
0.75 |
1 |
50 |
55 |
9 |
1" /1" |
300x180x220 |
9.2 |
Audited Supplier 
){kind=link}
){kind=link}