The JCP series are self-priming peripheral pumps, with peripheral impeller containing numerous radial blades in its edge, self-priming because of the particular design of the pump body which is with a small tank, water is threw outwards by centrifugal motion caused by the impeller. Then the water rotates with the impeller, generating high pressure. These pumps have a compact size and are very economical, finding the most different operating requirements such as: Supply water from well, pool an so on, increase the water pressure in the pipe, garden sprinkling or clean washing.
Pumps should be installed in a covered area, protected against the weather.
Operating Limitations
Max ambient temperature up to 40C
Max fluid temperature up to 80C
Max pressure up to 10 bar
Construction Features
Pump Body: Cast iron
Motor Housing: Aluminum
Shaft: 45#steel /stainless steel
Impeller: Brass
Motor: Closed, externally ventilated
Insulation Class: B/F
Protection Class: IP44/IP54
Duty: Continuously rated
Mechanical Seal: Ceramic steatite/ metalized carbon
220V/50Hz, 230V/50Hz, 110V/60Hz & 115V/60Hz models are available on request
Model |
Power |
Max. Flow L/h |
Max. Head m |
Max.Suct m |
Inlet/Outlet Diameter |
Master Carton mm |
G.W. Kg |
KW |
HP |
JCP-130 |
0.18 |
0.25 |
40 |
40 |
9 |
1"/1" |
330*210*190 |
7 |